Your position:Home > Industry news

Trimming machine and what is the difference between liquid trimming deburring

Release date:2017-02-17 09:40:25
 

Trimming device to replace the traditional deburring solution, such as file file, grinding head grinding, etc. As for traditional burring main point is to accept steel file, sandpaper, grinding head to objects, steel file to low and is associated with the proficiency level of workers, to go after the burr appearance brightness owe good grasp, sandpaper clearing burr, obedience is too low, easy wilting, long time use of workers and not durable; Grinding head too high, dust, the worker's proficiency level, after go to the burr appearance brightness much owe good master. How liquid deburring

Will be washed clean metal parts on chemical solutions (50 ℃), the metal parts appearance to ion main point in the solution.

These ions gathered in the appearance of workpiece, the chemical reaction to constitute a layer of resistance, small conductivity of mucous membrane, maintain artifacts appearance not corrupted,

Burr is prominent in appearance, the chemistry will burr to lose. When processing, just a trough. According to the difference of burr workpiece materials,

With the difference of chemical solution. Base secondary identity can be hydrochloric acid, phosphoric acid, sulfuric acid, hydrochloric acid two aniline and water, etc. Chemical deburring practical in small metal parts, can remove thickness is less than 0.07 mm thick burr.

 

Key words: